- Author
- Linteris, G. T.
- Title
- Acid Gas Production in Inhibited Propane-Air Diffusion Flames.
- Coporate
- National Institute of Standards and Technology, Gaithersburg, MD
- Book or Conf
- American Chemical Society. Halon Replacements - Technology and Science. National Meeting, 208th. Proceedings. ACS Symposium Series 611. Chapter 20. August 21-25, 1994, American Chemical Society, Washington, DC, Washington, DC, Miziolek, A. W.; Tsang, W., Editors, 225-242 p., 1995
- Keywords
- chemical inhibition | flame chemistry | flame models | flame retardants
- Identifiers
- model for acid gas formation
- Abstract
- The proposed replacements to halon 1301, mainly fluorinated and chlorinated hydrocarbons, are expected to be required in significantly higher concentrations than CF₃Br to extinguish fires. At these higher concentrations the by-products of the inhibited flames may include correspondingly higher portions of corrosive gases, including HF and HCl. To examine the chemical and transport-related mechanisms important in producing these acid gases, a series of inhibited flame tests are performed with several types of laboratory-scale burners, varying agent type and concentration. A wet-chemistry analysis of the final products of the flames using ion-selective electrodes for F anc Cl provides an experimental basis for quantitative understanding of the HF and HCl production. Production rates are measured for co-flow laminar and jet diffusion flames. Systematic selection of the agent concentrations, burner type, and air flow rates allows an assessment of the relative importance of agent transport and chemical kinetics on the acid gas production rates. These experimental results are then compared to a model which estimates the maximum HF and HCl production rates based on stoichiometric reaction to the most stable products. The results demonstrate the relative significance ofF, Cl, and H in the inhibitor and fuel, as well as the effect of different burner configurations.