- Author
-
Wojcik, G. S.
- Title
- Determining the Uncertainty of X-Ray Absorption Measurements.
- Coporate
- National Institute of Standards and Technology, Gaithersburg, MD
- Journal
-
Journal of Research of the National Institute of Standards and Technolgoy,
Vol. 109,
No. 5,
479-496,
September/October 2004
- Keywords
-
x ray absorption
|
cements
|
cement paste
|
moisture
|
mortar
|
uncertainty
|
wood
|
x ray attenuation
|
moisture content
- Identifiers
- non-destructive testing; Poisson process
- Abstract
- X-ray absorption (or more properly, x-ray attenuation) techniques have been applied to study the moisture movement in and moisture content of materials like cement paste, mortar, and wood. An increase in the number of x-ray counts with time at a location in a specimen may indicate a decrease in moisture content. The uncertainty of measurements from an x-ray absorption system, which must be known to properly interpret the data, is often assumed to be the square root of the number of counts, as in a Poisson process. No detailed studies have heretofore been conducted to determine the uncertainty of x-ray absorption measurements or the effect of averaging data on the uncertainty. In this study, the Poisson estimate was found to adequately approximate normalized root mean square errors (a measure of uncertainty) of counts for point measurements and profile measurements of water specimens. The Poisson estimate, however, was not reliable in approximating themagnitude of the uncertainty when averaging data from paste and mortar specimens. Changes in uncertainty from differing averaging procedures were well-approximated by a Poisson process. The normalized root mean square errors decreased when the x-ray source intensity, integration time, collimator size, and number of scanning repetitions increased. Uncertainties in mean paste and mortar count profiles were kept below 2% by averaging vertical profiles at horizontal spacings of 1 mm or larger with counts per point above 4000. Maximum normalized root mean square errors did not exceed 10% in any of the tests conducted.