- Author
- Stroup, D. W. | Madrzykowski, D. | Walton, W. D. | Twilley, W. H.
- Title
- Structural Collapse Fire Tests: Single Story, Ordinary Construction Warehouse.
- Coporate
- National Institute of Standards and Technology, Gaithersburg, MD
- Report
- NISTIR 6959, May 2003, 15 p.
- Distribution
- AVAILABLE FROM: National Technical Information Service (NTIS), Technology Administration, U.S. Department of Commerce, Springfield, VA 22161. Telephone: 1-800-553-6847 or 703-605-6000; Fax: 703-605-6900; Rush Service (Telephone Orders Only) 800-553-6847; Website: http://www.ntis.gov
- Keywords
- warehouses | structural collapse | building collapse | building fires | fire data | fire fighting | large scale fire tests | structural failure | temperature measurements
- Abstract
- Two fire tests were conducted in a warehouse located in Phoenix, Arizona to develop data for evaluation of a methodology for predicting structural collapse. A firewall was constructed to divide the warehouse into two fire compartments. Temperatures were measured as a function of time in three locations during the first test and in two locations during the second test. In addition, the concentration of carbon monoxide was measured at selected locations during each test. Stacks of wood pallets were used as the primary fuel source and were ignited using paper and an electric match. Some combustible debris and the building structural elements provided the remainder of the fuel load. Peak temperatures obtained during the tests ranged from approximately 300 deg C (570 deg F) to 800 deg C (1470 deg F). Peak carbon monoxide measurement reached 4% in the first test and 5% during the second test. The roof of the front half of the structure burned through approximately 18 minutes after ignition of the fire for the first test. The roof of the back half of the structure began burning about 15 minutes after the start of the second test.