displaying 1 - 10 results in total 19
Tran, H. C.
view article (1.0)Rates of Heat and Smoke Release of Wood in an Ohio State University Calorimeter.Department of Agriculture, Madison, WIFire and Materials, Vol. 12, No. 4, 143-151, December 1988Tran, H. C.
view article (1.0)Quantification of Smoke Generated From Wood in the NBS Smoke Chamber.Forest Products Lab., Madison, WIJournal of Fire Sciences, Vol. 6, No. 3, 163-180, May/June 1988Tran, H. C.
view article (1.0)Correlation of Wood Smoke Produced From NBS Smoke Chamber and OSU Heat Release Apparatus.Forest Products Lab., Madison, WIASTM STP 1082,American Society for Testing and Materials (ASTM). Characterization and Toxicity of Smoke. International Symposium. ASTM Committee E-5 on Fire Standards. ASTM STP 1082. December 5, 1988, ASTM, Philadelphia, PA, Phoenix, AZ, Hasegawa, H. K., Editors, 135-146 p., 1990Tran, H. C.; Janssens, M. L.
view article (1.0)Room Fire Test for Fire Growth Modeling--A Sensitivity Study.Department of Agriculture, Madison, WI; National Forest Products Assoc., Washington, DCJournal of Fire Sciences, Vol. 7, No. 4, 217-236, July/August 1989Tran, H. C.
view article (1.0)Heat Release Measurement of Wood Products Using the Ohio State University Apparatus.Forest Products Lab., Madison, WIProduct Safety Corporation. International Conference on Fire Safety, 13th. Volume 13. January 11-15, 1988, Milbrae, CA and Sunnyvale, CA, 298-311 p., 1988Tran, H. C.
view article (1.0)Experimental Aspects of Validating a Compartment Wall Fire Model.Forest Products Lab., Madison, WIInterscience Communications Ltd.; National Institute of Standards and Technology; Building Research Establishment; and Society of Fire Protection Engineers. Interflam 1990. (Interflam '90). Fire Safety. International Fire Conference, 5th. September 3-6, 1990, Interscience Communications Ltd., London, England, Canterbury, England, Franks, C. A., Editors, 13-24 p., 1990Tran, H. C.; White, R. H.
view article (1.0)Heat Release From Wood Wall Assemblies Using Oxygen Consumption Method.Department of Agriculture, Madison, WIChapter 25; ACS Symposium Series 425,American Chemical Society. Fire and Polymers--Hazards Identification and Prevention. National Meeting, 197th. ACS Symposium Series 425. April 9-14, 1989, American Chemical Society, Washington, DC, Dallas, TX, Nelson, G. L., Editors, 411-428 p., 1989Tran, H. C.
view article (1.0)Modifications to an Ohio State University Apparatus and Comparison With Cone Calorimeter Results.Forest Products Lab., Madison, WIHTD-Vol. 141,American Institute of Aeronautics and Astronautics/American Society of Mechanical Engineers (AIAA/ASME). Heat and Mass Transfer in Fires. AIAA/ASME Thermophysics and Heat Transfer Conference. HTD-Vol. 141. June 18-20, 1990, Am. Soc. of Mechanical Engineers, New York, Seattle, WA, Quintiere, J. G.; Cooper, L. Y., Editors, 131-139 p., 1990Tran, H. C.; Janssens, M. L.
view article (1.0)Wall and Corner Fire Tests on Selected Wood Products.Forest Products Lab., Madison, WI; National Forest Products Assoc., Washington, DCJournal of Fire Sciences, Vol. 9, No. 2, 106-124, March/April 1991Tran, H. C.
view article (1.0)Experimental Heat Release Rate of Wood Products.Forest Products Lab., Madison, WIInterscience Communications Limited. Heat Release and Fire Hazard. 1st U. S. Symposium. Abstracts. December 1991, San Diego, CA, 1-2 p., 1991