Neel, C. B.; Parker, J. A.; Fish, R. H.; Henshaw, J.; Newland, J. H.; Tempesta, F. L.
view article (1.0)
Heat Shields for Aircraft: A New Concept to Save Lives in Crash Fires.
National Aeronautics and Space Admin., Moffett Field,CA; Avco Corp., Lowell, MA
Astronautics and Aeronautics,
Vol. 9,
18-26,
November 1971
Lieff, M.
view article (1.0)
Fire Resistant Coverings.
County College of Morris, Dover, NJ
ASTM STP 826,
American Society for Testing and Materials. Fire Resistive Coatings: The Need for Standards. Sponsored by ASTM Committee E-6 on Performance of Building Constructions. ASTM Special Technical Publication 826. (ASTM STP 826). October 18, 1982,
ASTM, Philadelphia, PA,
Philadelphia, PA,
Lieff, M.; Stumpf, F. M., Editors,
3-13 p.,
1983
Keller, L. C.; Kimmel, B. G.; Schwartz, G.
view article (1.0)
New Ablative Plastics and Composites, Their Formulation aand Processing. Technical Report. May 1964-January 1965.
Hughes Aircraft Co., Culver City, CA
Air Force Materials Lab., Wright-Patterson AFB, OH,
AFML-TR-65-94,
April 1965,
50 p.
Mitchel, B. J.; Recesso, J. V.
view article (1.0)
Ablative Plastics Characterization. Part 1. Arc-Heater Screening. Technical Report.
AVCO Corp., Wilmington, MA
Air Force Systems Command, Wright-Patterson AFB, OH,
AFML-TR-65-156; RAD-TR-65-5,
May 1966,
166 p.
Wake, L. V.
view article (1.0)
Fire Retardant Coatings for Military Equipment--A Review.
Materials Research Lab., Melbourne, Australia
MRL-R-1104; AR-005-205,
February 1988,
33 p.
Paterson, J. R.; Thomas, J. E.
view article (1.0)
Use of Fillers to Enhance the Flame Retardant and Ablative Properties of Silicone Elastomers.
Vickers Shipbuilding and Engineering Ltd.; Dow Corning Ltd.
Plastics and Rubber Institute. Flame Retardants '83. International Conference. November 10-11, 1983,
Plastics and Rubber Institute, London, England,
London, England,
17/1-12 p.,
1983
Ross, R. M.
view article (1.0)
Pyrolysis-Gas Chromatography as a Tool for Studying the Degradation of Ablative Plastics.
General Electric Co., Valley Forge, PA
A71-26044,
Ablative Plastics,
Marcel Dekker, Inc., New York,
349-357 p.,
1968
Melnick, A. M.; Nolan, E. J.
view article (1.0)
Design and Development of a High-Heating-Rate Thermogravimetric Analyzer Suitable for Use With Ablative Plastics.
General Electric Co., Philadelphia, PA
Ablative Plastics,
Marcel Dekker, Inc., New York,
315-322 p.,
1971
Early, D. E.
view article (1.0)
Arc Imaging Furnace for the Characterization of Thermally Protective Materials. Final Report.
Dayton Research Institute Univ., OH
Air Force Materials Lab., Wright-Patterson AFB, OH,
AFML-TR-74-128,
June 1974,
32 p.
Baer, A. D.
view article (1.0)
Thermal Decomposition at High Heating Rates.
Utah Univ., Salt Lake City
University of Utah. Flammability of Materials. Polymer Conference Series. July 7-11, 1975,
Salt Lake City, UT,
1-40 p.,
1975