Perera, M. D. A.; Stephen, R. K.; Tull, R. G.
view article (1.0)
Use of BREFAN to Measure the Airtightness of Non-Domestic Buildings.
Fire Research Station, Borehamwood, England
BRE IP 06/89,
March 1989,
4 p.
Fang, G.; Dingmao, H.; Huaimin, W.
view article (1.0)
Using Dipropyl Sulfide to Test the Leakage of Protective Clothing.
Research Institute of Chemical Defence, Beijing, China
ASTM STP 989,
American Society for Testing and Materials (ASTM). Performance of Protective Clothing. ASTM STP 989. International Symposium, 2nd. January 19-21, 1987,
ASTM, Philadelphia, PA,
Tampa, FL,
Mansdorf, S. Z.; Sager, R.; Nielsen, A. P., Editors,
307-313 p.,
1988
Persily, A. K.
view article (1.0)
Envelope Design Guidelines for Federal Office Buildings: Thermal Integrity and Airtightness.
National Institute of Standards and Technology, Gaithersburg, MD
General Services Administration, Washington, DC,
NISTIR 4821,
March 1993,
208 p.
Myint, L. S.
view article (1.0)
Correlation Between Building Enclosure Efficiency and Fire Extinguishing Agents Retention Time.
Malaysia Univ.
Interscience Communications Ltd.; National Institute of Standards and Technology; Building Research Establishment; and Society of Fire Protection Engineers. Interflam 1993. (Interflam '93). Fire Safety. International Fire Conference, 6th. March 30-April 1, 1993,
Interscience Communications Ltd., London, England,
Oxford, England,
Franks, C. A., Editors,
785-795 p.,
1993
Tsuchiya, Y.
view article (1.0)
Heat Release Rate Measurement for Evaluating the Flammability of Aircraft Materials.
National Research Council of Canada, Ottawa, Ontario
Advisory Group for Aerospace Research and Development (AGARD). Aircraft Fire Safety. Proceedings No. 467. May 1989,
Portugal, Spain,
32/1-8 p.,
1989
Persily, A. K.
view article (1.0)
NIST/GSA Design Guidelines for Thermal Envelope Integrity.
National Institute of Standards and Technology, Gaithersburg, MD
American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE). Thermal Performance of the Exterior Envelopes of Buildings V. Proceedings of the ASHRAE/DOE/BTECC Conference. December 7-10, 1992,
Clearwater Beach, FL,
693-699 p.,
1992
Wilson, A. G.; Tamura, G. T.
view article (1.0)
Stack Effect and Building Design.
National Research Council of Canada, Ottawa, Ontario
CBD 107,
November 1968,
4 p.
Persily, A. K.; Martin, S. R.
view article (1.0)
Modeling Study of Ventilation in Manufactured Houses.
National Institute of Standards and Technology, Gaithersburg, MD
Department of Housing and Urban Development, Washington, DC,
NISTIR 6455,
February 2000,
87 p.
Dewsbury, J.; Whiteley, R. A.
view article (1.0)
Review of Fan Inetgrity Testing and Hold Time Standards.
UMIST, Manchester, England; Ansul Limited, Manchester, England
Fire Technology,
Vol. 36,
No. 4,
249-265,
4th Quarter, November 2000
Dewsbury, J.; Whiteley, R. A.
view article (1.0)
Hold Time Calculations for Non-Standard Enclosures.
Department of Civil and Construction Engineering at UMIST, Manchester, England; Wormald Ansul (UK) Limited, Manchester, England
Fire Technology,
Vol. 40,
No. 1,
75-89,
January 2004