Ohlemiller, T. J.; Dolan, S.
view article (9.292924)
Ignition and Lateral Flame Spread Characteristics of Composite Materials.
National Institute of Standards and Technology, Gaithersburg, MD
David Taylor Research Center, Annapolis, MD,
NISTIR 89-4030,
January 1989,
29 p.
Dietenberger, M. A.
view article (9.292924)
Ignitability Analysis of Siding Materials Using Modified Protocol for LIFT Apparatus.
Forest Products Lab., Madison, WI
Product Safety Corporation. International Conference on Fire Safety, 20th. Volume 20. Proceedings. January 9-13, 1995,
Product Safety Corp., Sunnyvale, CA,
Millbrae, CA,
297-306 p.,
1995
Merryweather, G.; Spearpoint, M. J.
view article (9.292924)
Ignition of New Zealand Wood Products in the LIFT, RIFT and ISO 5657 Apparatus Using the ASTM E 1321-97 Protocol.
Lincolne Scott Ltd, Level 3, 65 Upper Queen Street, Auckland, 1001, New Zealand; University of Canterbury, Christchurch, New Zealand
Journal of Fire Sciences,
Vol. 26,
No. 1,
63-88,
January 2008
Babrauskas, V.; Wetterlund, I.
view article (8.905932)
Role of Flame Flux in Opposed-Flow Flame Spread.
Fire Science and Technology, Inc., Damascus, MD; Swedish National Testing and Research Institute, Boras, Sweden
Fire and Materials,
Vol. 16,
No. 6,
275-281,
1995
Interscience Communications Limited. Fire and Materials. 3rd International Conference and Exhibition. October 27-28, 1994,
Arlington, VA,
75-87 p.,
['1994', '1995']
Wu, N.; Torero, J. L.
view article (8.905932)
Enhanced Burning of Difficult to Ignite/Burn Fuels Including Heavy Oils.
Maryland Univ., College Park
National Institute of Standards and Technology, Gaithersburg, MD,
NIST GCR 98-750,
June 1998,
259 p.
Beyler, C. L.; Hunt, S. P.; Lattimer, B. Y.; Iqbal, N.; Lautenberger, C.; Dembsey, N.; Barnett, J.; Janssesn, M.; Dillon, S.; Greiner, A.
view article (8.905932)
Prediction of ISO 9705 Room/Corner Test Results. Volume 1.
Hughes Associates, Inc., Baltimore, MD; Coast Guard, Washington, DC
Department of Transportation, Washington, DC,
CG-D-22-99, 1,
November 1999,
80 p.
Janssens, M. L.; Alley, A.; Grenier, A.
view article (8.905932)
Development of Cone Calorimeter Acceptance Criteria for Composite Fire Restricting Materials Used on High Speed Craft.
Southwest Research Institute, San Antonio, TX
U.S./Japan Government Cooperative Program on Natural Resources (UJNR). Fire Research and Safety. 14th Joint Panel Meeting. Proceedings. May 28-June 3, 1998,
['Tsukuba, Japan', 'Tokyo, Japan'],
107-114 p.,
1998
Wu, N.; Kolb, G.; Torero, J. L.
view article (8.905932)
Effect of Weathering on the Flammability of a Slick of Crude Oil on a Water Bed.
Maryland Univ., College Park
Combustion Science and Technology,
Vol. 161,
269-308,
2000
Levin, B. C.; Braun, E.; Shields, J. R.; Lowe, D. L.
view article (8.607319)
Reduction of Hydrogen Cyanide Concentrations and Acute Inhalation Toxicity From Flexible Polyurethane Foam Combustion Products by the Addition of Copper Compounds. Part 3. The Effect of Copper Additives on the Flammability Characteristics of Flexible Polyurethane Foam.
National Institute of Standards and Technology, Gaithersburg, MD
International Copper Assoc., Ltd., New York; Society of the Plastics Industry, Inc., New York,
NISTIR 4441,
October 1990,
38 p.
Cleary, T. G.; Quintiere, J. G.
view article (8.607319)
Flammability Characterization of Foam Plastics.
National Institute of Standards and Technology, Gaithersburg, MD
Society of Plastics Industries, Inc., Washington, DC,
NISTIR 4664,
October 1991,
142 p.