displaying 1421 - 1430 results in total 2409
Hamins, A.; Borthwick, P.
view article (1.0)Suppression of Ignition Over a Heated Metal Surface.National Institute of Standards and Technology, Gaithersburg, MDCombustion and Flame, Vol. 112, No. 1/2, 161-170, January 1998Zhang, J.; Shields, T. J.; Silcock, G. W. H.
view article (1.0)Effect of Specimen Restraint Methods on Cone Calorimeter Results.University of Ulster, Northern IrelandJournal of Applied Fire Science, Vol. 6, No. 3, 203-229, 1996/1997Wade, C.; Barnett, J.
view article (1.0)Room-Corner Fire Model Including Fire Growth on Linings and Enclosure Smoke-Filling.Building Research Association of New Zealand, Judgeford; Worcester Polytechnic Inst., MAJournal of Fire Protection Engineering, Vol. 8, No. 4, 183-193, 1997Carey, W. M.
view article (1.0)Fire Tests of Flammable and Combustible Liquids in Small Containers.Underwriters Laboratories, Inc., Northbrook, ILSFPE Bulletin, 9-10, Fall 1997Roma, P.; Camino, G.; Luda, M. P.
view article (1.0)Mechanistic Studies on Fire Retardant Action of Fluorinated Additives in ABS.Enichem SpA, Ferrara, Italy; Chimica Fisica e Chimica dei Materiali dell'Universita, Torino, ItalyFire and Materials, Vol. 21, No. 5, 199-204, September/October 1997Law, M.
view article (1.0)Developments in the Discipline of Fire Safety Engineering.Fire Engineers Journal, Vol. 57, No. 190, 12-18, September 1997Rew, P. J.; Deaves, D. M.
view article (1.0)Current Research Undertaken for the UK Health and Safety Executive on Industrial Fires and Their Effects.W.S. Atkins Safety and Reliability, UKIndustrial Fires III Workshop Proceedings. Major Industrial Hazards. EUR 17477 EN. European Commission. September 17-18, 1996, Riso, Denmark, 245-255 p., 1996Assovskii, I. G.
view article (1.0)Radiation-Driven Ignition of Non-Uniform Materials.Semenov Institute of Chemical Physics, Moscow, RussiaFire Retardanty of Polymeric Materials, 6th European Meeting. F.R.P.M. '97. Proceedings. Posters. LCAPS, Ecole Nationale Superieure de Chimie de Lille (ENSCL) and Centre de Recherche et d'Etude sur les Procedes d'Ignifugation des Materlaux (CREPIM). September 25-26, 1997, Lille, France, Bourbigot, S.; LeBras, M.; Delobel, R., Editors, 37-37 p., 1997Bernard, M. L.; DiRollo, S.; Bonel, L.
view article (1.0)Analyse des phenomenes de degradation thermique et d'inflammation d'une resine polyester chargee en hydroxyde aluminium. [Analysis of the Thermal Degradation phenomenon and the Ignition of a Polyester Resin Charged in Hydroxide Aluminium.]Universite de Provence, FranceFire Retardanty of Polymeric Materials, 6th European Meeting. F.R.P.M. '97. Proceedings. Posters. LCAPS, Ecole Nationale Superieure de Chimie de Lille (ENSCL) and Centre de Recherche et d'Etude sur les Procedes d'Ignifugation des Materlaux (CREPIM). September 25-26, 1997, Lille, France, Bourbigot, S.; LeBras, M.; Delobel, R., Editors, 140-141 p., 1997Santay, A. J.; Becker, I. D., Jr.; Werley, B. L.
view article (1.0)Design Strategies for Polymer-Lined Flex-Hose Distance/Volume Pieces.Air Products and Chemicals, Inc., Allentwon, PA['ASTM STP 1319', 'ASTM PCN 04-013190-31']ASTM STP 1319; ASTM PCN 04-013190-31American Society for Testing and Materials. Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Eighth (8th) Volume. ASTM STP 1319. Proceedings. 1997, ASTM, Philadelphia, PA, Janoff, D. D.; Royals, W. T.; Chou, T. C.; Steinberg, T. A., Editors, 93-107 p., 1997