- Author
- Winslow, D. N. | Cohen, M. D. | Bentz, D. P. | Snyder, K. A. | Garboczi, E. J.
- Title
- Percolation and Pore Structure in Mortars and Concrete.
- Coporate
- Purdue Univ., West Lafayette, IN National Institute of Standards and Technology, Gaithersburg, MD
- Journal
- Cement and Concrete Research, Vol. 24, 25-37, 1994
- Keywords
- mortar | concretes | percolation | pore structure | interfacial zone pores | sand
- Abstract
- The cement paste in concrete and mortar has been shown to have a pore size distribution different than that of plain paste hydrated without aggregate. For mortar and concrete, additional porosity occurs in pore sizes larger than the plain paste's threshold diameter as measured by mercury intrusion. Based on the assumption that these larger pores are essentially present only in the interfacial zones surrounding each aggregate, an experimental program was designed in which the volume fraction of sand in a mortar was varied in a systematic fashion and the resultant pore system probed using mercury intrusion porosimetry. The intrusion characteristics were observed to change drastically at a critical sand content. Similar results are observed for a series of mortar specimens in which the cement paste contains 10% silica fume. To better interpret the experimental results, a hard core/soft shell computer model has been developed to examine the percolation characteristics of these interfacial zone pores. Using the model, interfacial zone percolation in concretes is also examined. Finally, the implications of interfacial zone percolation for transport properties and durability of mortar and concrete are discussed.